Gate valve

Gate valve is a shut-off pipeline fitting.

Operating media

Gate valves are used for water, steam, gas, compressed air, powders and viscous media with a wide range of operating pressures and temperatures. All gate valves that you will find in our catalog can be used for shutting off water flow, the possibility of using them with other operating media should be clarified with suppliers.

Application area

Gate valves were widely used in heating systems, water supply and sewage pipelines with a diameter of DN50 and above before the appearance of disk shut-off valves and ball valves, but the need for technical maintenance and high cost became the main reason for their abandonment. Despite the fact that most modern gate valves are devoid of previous disadvantages, they are usually installed during the reconstruction of external heating and water supply networks, on steam pipelines with high working temperatures and pressures, as well as on sewage and pipelines with powdery and viscous media.

Advantages

High reliability.
Simple construction.
Suitable for repair.
Small installation length.
Wide range of operating pressures.
Low hydraulic resistance.
Possible full-bore design.
Do not require long levers for control.
Smooth opening eliminates hydraulic shocks in the system.
Allowed to work with operating media at very high temperatures.
A drive with low torque is required for automatic control of the gate valve.

Disadvantages

High price.
High metal consumption and weight.
Installation with the stem down is not allowed.
Presence of stagnant zones in the pass-through part of the body.
Large installation height, especially for gate valves with an extendable stem.
Gate valves with a stem sealing ring require technical maintenance.
Abrasive wear of metal sealing rings leads to a violation of tightness.
A large number of revolutions of the flywheel is required to fully open or close the gate valve.

What can replace it