The guarantee of long and trouble-free operation of reduction valves is their installation in accordance with the installation instructions, in addition, the following recommendations should be taken into account:
A strainer should be installed before the reduction valve in the direction of water flow.
Manometers should be installed before and after the reduction valve, necessary for adjustment and monitoring of the valve operation.
In responsible areas where pressure increase beyond the setting pressure is unacceptable, a safety valve should be installed after the reduction valve.
The mounting position of the reduction valves can be any on a horizontal, vertical or inclined pipeline, unless otherwise specified in the installation instructions.
The valve body should not be subjected to torsion, tension, bending or compression loads from connected pipelines.